[milton]

For my 2.2CDi 2006 manual, should I use the fully or semi synthetic Millers 5w30 or 5w40 whats the general on this one?
I can go by the book, or (which I prefer) real peoples experiences!

5w40 synthetic :thumbs:

 

[milton]

Thanks Milton I shall get some.
As I do not know what the previous owner used, would you suggest a flush oil then refill with the Millers? Of course I woul also be fitting a new filter at the same time.

Personally I would just make sure the engine is well warmed up and then drain the oil out. Let it drain for around 15 mins and you will get nearly all of the old oil out. Then just fill up with new. Flushing oil can cause problems.

Best regards
Milton :biggrin:

 

[milton]

You need a copper crush washer for the sump plug :thumbs:

 

[milton]

Is the 10w40 fully synthetic.

What is the acea rating of the oil, A1, A3, B1, C3 ?

Best regards
Milton :biggrin:

 

[milton]

Good choice.

A lot of people use Fuchs titan supersyn 5w40 which is available on the internet from mytyres.

Best regards
Milton :biggrin: