Nissan X-Trail Forum banner
1 - 1 of 1 Posts

385 Posts
Discussion Starter · #1 ·
One thing I like to do is to keep my Alloys in tip top condition.

This is what I do from when the alloys were new.

I always clean them with a non-acid wheel wash.

Polished using something like Klasses AIO.

I then apply two coats of the Poorboys wheel sealant and then one coat of Jetseal 109.

After the wheels have been on the motor for a couple of months I follow this procedure but start by using a clay bar and lubricant to get any tar spots etc of the alloy.

I do this about every couple of months it help protect against road grit and makes for washing the wheel a breeze.
Not to mention the silky smooth feel it gives you and the shiny look.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.