Nissan X-Trail Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
I changed my towbar from the standard Nissan unit made (I think) by Westfalia to a Witter as the ball was too low. All in all took about 4 hours but I retained the original 7-pin socket and added a 13-pin wired from the battery using a trigger board thingy. Fitted park sensors at the same time...
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top