This morning I was under the car replacing some of the clips that were missing or worn for the splash guard (under the sump). I had bought these as referred to on a previous thread.

http://www.ebay.co.uk/itm/400344954053? ... EBIDX%3AIT

However, I found the 4 (or 5) clips along the front were a little bigger and the above were far to loose. Anyone got a link to the correct ones for the front edge?

Thanks, a bit expensive for just the 5 larger ones that I want. However probably still cheaper than Nissan.

Hi guys

Having the same problem as the original poster - the front clips are bigger than other ones (I bought ones which were way too small).

The ebay link that was posted in response doesn't work.

Can anyone help by posting an ebay or Amazon link to the correct retainer size please?

TIA

Del

Funny this is mentioned as changed my oil last week and I had to break some of the clips off as think wrong type were used . l have just ordered a bucket of different clips off ebay to see which ones work best .

I found this website to be good last time that I had to replace some clips.

https://www.vehicleclips.co.uk/vehicle/?vehicle_make=310&vehicle_model=795&vehicle_series=796&product_list_mode=list

Thanks AMB - will give them a go!

I do not know how is in the UK, here, every auto parts/accessory store has clips. The smaller ones are 8mm and the bigger(In front, thru the bumper) are 10mm, are like 30-50 eurocents a piece.
The 8mm ones go in the wheel arch fender liner too.

Thanks X-Trail Nut, that is very helpful!

By the way, your English is great. Better than mine and I was born and lived here for 50 years!

Many thanks

Del

Just closing the loop here.

The 10mm are the ones to go for, for the front part of the splash guard.

Google this and should give you the part you need

01553-09241

Cheers

Del